Naushad Ansari | Energy Technology | Best Researcher Award

Posted on by ScienceFather

🌟Assist Prof Dr. Naushad Ansari, Energy Technology, Best Researcher Award🏆

  •   Assistant Professor at Delhi Technological University, Delhi, India

Naushad Ahmad Ansari is an accomplished Assistant Professor in the Department of Mechanical Engineering at Delhi Technological University (DTU), India. With over 22 years of teaching experience and 12 years of dedicated research, Ansari specializes in Thermal Engineering, focusing on subjects such as Applied Thermodynamics, Internal Combustion Engine, Refrigeration & Air-conditioning, and Fluid Mechanics. His research interests primarily revolve around Energy Technology, where he has made significant contributions through numerous publications and active participation in professional societies.

Author Metrics

Scopus Profile

Google Scholar Profile

Ansari’s scholarly impact is quantified through various author metrics, including an h-index of 9. This metric reflects the significant influence of his research publications within the scientific community, underscoring the quality and relevance of his contributions to Thermal Engineering and Energy Technology.

  • Citations: 196 citations from 170 documents
  • Documents: 27 documents authored or co-authored
  • h-index: 6

This information offers a snapshot of Ansari’s academic impact, including the number of citations received for his work, the number of documents he has authored or co-authored, and his h-index, which is a measure of both productivity and citation impact of a researcher’s publications. It suggests that Ansari has made a significant contribution to his field, with a moderate h-index and a substantial number of citations for his published works.

Education

Ansari pursued his academic journey in Mechanical Engineering, starting with a Bachelor’s degree (BTech) from Aligarh Muslim University, followed by a Master’s degree (MTech) from the same institution. He further enhanced his expertise by completing his doctoral studies (PhD) at Delhi Technological University, solidifying his foundation in the field.

Research Focus

Ansari’s research interests are centered on Energy Technology, encompassing various aspects of Thermal Engineering. His work delves into areas such as energy efficiency, renewable energy systems, and the optimization of thermal processes. By leveraging his extensive knowledge in Applied Thermodynamics, Internal Combustion Engine, and related disciplines, Ansari aims to address contemporary challenges in sustainable energy development.

Professional Journey

Since joining Delhi Technological University as an Assistant Professor in December 2008, Ansari has demonstrated remarkable dedication to both teaching and research. Over the years, he has mentored numerous students, imparting valuable knowledge and fostering a passion for Mechanical Engineering. His commitment to academic excellence and continuous learning has earned him recognition as a respected educator and researcher in his field.

Honors & Awards

Throughout his career, Ansari has been honored with various accolades for his outstanding contributions to academia and research. These recognitions serve as a testament to his dedication and expertise in Thermal Engineering and Energy Technology, further motivating him to pursue excellence in his endeavors.

Publications Noted & Contributions

Ansari’s research contributions are reflected in his extensive publication record, comprising over forty research papers in reputed international journals and conferences. His work covers a wide range of topics within Thermal Engineering, providing valuable insights and advancements in the field. Additionally, Ansari actively engages in professional societies and conferences, contributing to the exchange of ideas and knowledge dissemination within the academic community.

Title: Coupled thermal and structural analysis of disc brake rotor with varying angle of rotation of ventilation holes
Authors: A Choudhary, A Jaiswal, A Kant, M Zunaid, NA Ansari
Journal: Materials Today: Proceedings
Volume: 56
Pages: 834-844
Year: 2022
Citations: 4

Title: Exhaust gas recirculation effect on the performance of a CRDI diesel engine fuelled with linseed biodiesel/diesel blend through response surface methodology
Authors: VK Singh, NA Ansari, A Sharma, S Gautam, M Kumar, Y Singh
Journal: Proceedings of the Institution of Mechanical Engineers, Part C: Journal of …
Volume: (Not specified)
Year: 2021
Citations: 4

Title: Non-Newtonian pulsatile flow through an artery with two stenosis
Authors: G Kumar, H Kumar, K Mandia, M Zunaid, NA Ansari, A Husain
Journal: Materials Today: Proceedings
Volume: 46
Pages: 10793-10798
Year: 2021
Citations: 4

Title: A review of ci engine performance and emissions with graphene nanoparticle additive in diesel and biodiesel blends
Authors: VK Singh, NA Ansari, A Arora
Book: Advances in Manufacturing and Industrial Engineering: Select Proceedings of …
Year: 2021
Citations: 4

Title: EMISSION CHARACTERISTICS OF A DIESEL ENGINE USING SOYABEAN OIL AND DIESEL BLENDS
Authors: DT NA Ansari, J Kumar, A Kumar
Journal: International Journal of Research in Engineering and Technology

Research Timeline

Ansari’s research journey has been characterized by continuous growth and exploration. Starting from his early academic pursuits, he has steadily advanced his expertise through rigorous study and research activities. Over the years, his dedication and perseverance have culminated in numerous achievements and milestones, establishing him as a prominent figure in the field of Mechanical Engineering, particularly in the realm of Thermal Engineering and Energy Technology.

Sami Rtimi | Photocatalysis | Editorial Board Member

Posted on by ScienceFather

🌟Dr. Sami Rtimi, Photocatalysis, Editorial Board Member🏆

 Global Institute for Water, Environment and Health, Switzerland

Dr. Sami Rtimi, a Spanish national with dual Ph.D. degrees, possesses 17 years of expertise in academia and industry. Currently serving as the Director of Innovation at the Global Institute for Water, Environment, and Health, he specializes in photoresponsive materials, environmental remediation, and materials characterization. His comprehensive experience includes lecturing, editing books, organizing conferences, and receiving awards for outstanding contributions to Photocatalysis and New Science Inventions.

Author Metrics:

Google Scholar Profile

LinkedIn Profile

Orcid Profile

These metrics indicate a substantial impact and influence of the author’s work. The h-index of 45 suggests that the author has 45 papers, each of which has been cited at least 45 times. The i10-index of 132 indicates that the author has 132 publications with at least 10 citations each. These metrics are widely used to assess the scholarly impact and productivity of an author.

  • Total Citations: 6209
  • h-index: 45
  • i10-index: 132

Education:

Dr. Rtimi earned his Ph.D. in Chemistry and Chemical Engineering from EPFL, Switzerland, in 2016 and another Ph.D. in Biological Sciences (Environmental Microbiology) from the University of Carthage, Tunisia, in 2014. His educational journey also includes master’s degrees in Environmental Sciences and Analytical Chemistry and Biology.

Research Focus:

His research revolves around photoresponsive materials, environmental remediation, and the characterization of self-sterilizing thin films. With a focus on healthcare-acquired infections prevention, he explores the interaction between nanomaterials and human cells, especially in bio-nano interactions.

Professional Journey:

Having worked at EPFL-Switzerland, he served as a Doctoral Assistant, Scientific Assistant, and later as a Scientist (Post-doc) and Advisor. His roles included responsibilities in safety, webmastering, and supervising students. Currently, as the Director of Innovation, he leads technology and pilot projects for environmental remediation using solar and UV light.

Honors & Awards:

Dr. Rtimi has received notable recognition, including the Outstanding Research Award in Photocatalysis (2018) and the Research Award on New Science Inventions (2021). His global impact is evident in being acknowledged as the most active scientist worldwide in the field of “Disinfection; Photocatalysis; Microbial inactivation” (2016-2021).

Publications Top Noted & Contributions:

With a prolific publication record, Dr. Rtimi has authored over 130 articles, book chapters, and patents, accumulating an impact factor of 1119.9. His editorial contributions include editing three books and organizing eleven special issues in renowned journals.

“Piezoelectric materials for catalytic/photocatalytic removal of pollutants: Recent advances and outlook”

Authors: Z Liang, CF Yan, S Rtimi, J Bandara

Published in Applied Catalysis B: Environmental (2019, Volume 241, Pages 256-269)

Impact Factor: 449

“Mechanisms and adsorption capacities of biochar for the removal of organic and inorganic pollutants from industrial wastewater”

Authors: TG Ambaye, M Vaccari, ED van Hullebusch, A Amrane, S Rtimi

Published in International Journal of Environmental Science and Technology (2021, Pages 1-22)

Impact Factor: 374

“Ultra-high color rendering warm-white light-emitting diodes based on an efficient green-emitting garnet phosphor for solid-state lighting”

Authors: X Huang, J Liang, S Rtimi, B Devakumar, Z Zhang

Published in Chemical Engineering Journal (2021, Volume 405, Page 126950)

Impact Factor: 147

“Iron oxide-mediated semiconductor photocatalysis vs. heterogeneous photo-Fenton treatment of viruses in wastewater. Impact of the oxide particle size.”

Authors: S Giannakis, S Liu, A Carratalà, S Rtimi, MT Amiri, M Bensimon, …

Published in Journal of Hazardous Materials (2017, Volume 339, Pages 223-231)

Impact Factor: 128

“Emerging technologies for biofuel production: A critical review on recent progress, challenges and perspectives”

Authors: TG Ambaye, M Vaccari, A Bonilla-Petriciolet, S Prasad, …

Published in Journal of Environmental Management (2020, Volume 290, Page 112627)

Research Timeline:

From 2016 to 2021, Dr. Rtimi’s research has made significant contributions to the fields of photocatalysis, disinfection, and microbial inactivation. Engaging in international research stays and collaborations, he has played a crucial role in advancing knowledge in his areas of expertise.

Yulong Men | Photocatalysis | Best Researcher Award

Posted on by ScienceFather

🌟Mr. Yulong Men, Photocatalysis, Best Researcher Award🏆

Shanghai Jiao Tong University, China

Professional Profiles:

Bio Summary:

Dr. Yu-Long Men is a researcher affiliated with Shanghai Jiao Tong University since 2019. With a notable H-index of 15 and a substantial citation count of 1061, Dr. Men has made significant contributions to the field of chemistry and materials science. His research primarily focuses on various aspects of catalysis, electrocatalysis, and photocatalysis, particularly in the context of carbon nanotubes, metal-oxide-based photocatalysts, and other nanomaterials.

Research Focus:

Dr. Men’s research is centered around the development and application of advanced materials for catalysis and energy-related processes. His work includes exploring the electronic interactions on platinum/(metal-oxide)-based photocatalysts for selective photoreduction of CO2, as well as investigating the electrocatalytic properties of various nanomaterials for applications such as glucose oxidation and water oxidation.

Professional Journey:

  • Joined Shanghai Jiao Tong University in 2019

Publications Top Noted & Contributions:

Dr. Men has authored numerous impactful publications in renowned journals, contributing significantly to the scientific community. Some notable works include studies on boosting the adsorption and removal of dye from water using functionalized carbon nanotubes, electrocatalytic oxidation of glucose, and advancements in photocatalytic CO2 reduction.

1. “Electronic Interactions on Platinum/(Metal-Oxide)-Based Photocatalysts Boost Selective Photoreduction of CO2 to CH4“

  • Authors: Liu, Peng; Men, Yu-Long; (…); Pan, Yun-Xiang
  • Published: Sep 2023
  • Times Cited: 2

2. “Boosting the Adsorption and Removal of Dye from Water by COOH-functionalized Carbon Nanotubes“

  • Authors: Zhao, Binran; Zhao, Yiyi; (…); Pan, Yun-Xiang
  • Published: Mar 2023
  • Journal: Green Chemical Engineering
  • Times Cited: 6

3. “Overturning Photoreduction Product of CO2 by Defect- and COOH-functionalized Multi-wall Carbon Nanotubes“

  • Authors: Liu, Peng; Niu, Lin; (…); Pan, Yun-Xiang
  • Published: Jan 2023
  • Times Cited: 14

4. “Fast and Efficient Electrocatalytic Oxidation of Glucose Triggered by Cu2O-CuO Nanoparticles Supported on Carbon Nanotubes“

  • Authors: Wang, Zhongting; Liu, Yi; (…); Pan, Yun-Xiang
  • Published: Sep 2022
  • Times Cited: 4

5. “Visible-Light-Driven Photocatalytic H2 Production from H2O Boosted by Hydroxyl Groups on Alumina“

  • Authors: Zhao, Binran; Wang, Xujun; (…); Pan, Yun-Xiang
  • Published: May 2022
  • Times Cited: 6

Author Metrics:

H-index: 15

Sum of Times Cited: 1061

Total Publications: 25

Web of Science Core Collection Publications: 2

Research Timeline:

2023: Published work on selective photoreduction of CO2 to CH4.

2022: Explored the electrocatalytic oxidation of glucose triggered by Cu2O-CuO nanoparticles.

2022: Investigated recent progress in material fabrication and modification by cold plasma technique.

Muhammad Khalid Hussain | Photocatalysis | Young Scientist Award

Posted on by ScienceFather

🌟Dr. Muhammad Khalid Hussain, Photocatalysis, Young Scientist Award🏆

 Doctorate at Australian National University, Australia

Professional Profiles:

Bio Summary:

Dr. Muhammad Khalid Hussain is a Visiting Research Fellow at the Australian National University, specializing in Materials Science and Condensed Matter Physics. With a Ph.D. in Material Science from the University of Gujrat, Pakistan, he brings expertise in environmental catalysis, photo and electrocatalysis, energy conversion, and energy storage. His research focuses on synthesizing novel nanostructures, characterizing materials using advanced techniques, and conducting photocatalytic and electrochemical analyses for various applications.

Education:

Ph.D. in Material Science, University of Gujrat, Pakistan (2018–2022)

M.Phil. in Physics, University of Gujrat, Pakistan (2015–2017)

BS in Physics (Hons), University of Gujrat, Pakistan (2011–2015)

F.Sc. (Pre-Engineering), B.I.S.E Gujranwala, Pakistan (2009–2011)

Research Focus:

Dr. Hussain’s research revolves around Materials Science and Condensed Matter Physics, specifically:

Fabrication of novel nanostructures, including metal oxides and chalcogenides.

Materials characterization using microscopy and spectroscopy techniques.

Photocatalytic and electrochemical analysis for wastewater treatment and energy conversion.

Synthesis of 2D high entropy nanosheets for photo and electrocatalytic applications.

Professional Journey:

Visiting Research Fellow, Research School of Chemistry, Australian National University (2023–Present)

Lecturer in Physics, University of Gujrat, Pakistan (2019–2022)

Research Associate, University of Gujrat, Pakistan (2017–2019)

Lecturer, College Teaching Intern, Govt. Abdul Haq Islamia Degree College (2016–2017)

Honors & Awards:

IRSIP Scholarship from Higher Education Commission of Pakistan (2022)

1st position in the comprehensive exam of Ph.D.

Award of Laptop under the Shebaz Shareef Youth Scheme.

Merit Scholarship during F.Sc.

Publications Top Noted & Contributions:

“Synthesis of Novel W-Mo incorporated NiO cross-linked Nano-platelets” – Journal of Energy Storage.

“Synthesis of heterojunction BiVO4/MnO2 graphene ternary nanocomposites” – Journal of Materials Science.

“In situ Sol-Gel Fabrication of Novel Lanthanum-Doped Nickel Oxide Nanostructures” – RSC Advances.

“Enhanced photocatalytic activity of Al and Fe co-doped ZnO nanorods for methylene blue degradation”

  • Published in Ceramics International (2019).
  • Authors: NR Khalid, A Hammad, MB Tahir, M Rafique, T Iqbal, G Nabi, MK Hussain.
  • Focus: Enhanced photocatalytic activity of Al and Fe co-doped ZnO nanorods for methylene blue degradation.

“Surfactant-assisted synthesis of MoO3 nanorods and its application in photocatalytic degradation of different dyes in aqueous environment”

  • Published in the Journal of Molecular Liquids (2022).
  • Authors: MK Hussain, NR Khalid.
  • Focus: Synthesis of MoO3 nanorods with surfactant assistance and their application in the photocatalytic degradation of different dyes in an aqueous environment.

“A Novel Ag2O/Fe–TiO2 Photocatalyst for CO2 Conversion into Methane Under Visible Light”

  • Published in the Journal of Inorganic and Organometallic Polymers and Materials (2019).
  • Authors: NR Khalid, MK Hussain, G Murtaza, M Ikram, M Ahmad, A Hammad.
  • Focus: Development of a novel Ag2O/Fe–TiO2 photocatalyst for the conversion of CO2 into methane under visible light.

“Fabrication of CuO/MoO3 pn heterojunction for enhanced dyes degradation and hydrogen production from water splitting”

  • Published in the International Journal of Hydrogen Energy (2022).
  • Authors: MK Hussain, NR Khalid, M Tanveer, I Kebaili, H Alrobei.
  • Focus: Fabrication of CuO/MoO3 pn heterojunction for enhanced degradation of dyes and hydrogen production from water splitting.

“Fabrication of p–n heterojunction Ag2O@Ce2O nanocomposites makes enables to improve photocatalytic activity under visible light”

  • Published in Applied Nanoscience.
  • Authors: NR Khalid, A Arshad, MB Tahir, MK Hussain.
  • Focus: Fabrication of p–n heterojunction Ag2O@Ce2O nanocomposites to improve photocatalytic activity under visible light.

Author Metrics:

Citations: 284

H-Index: 9

i10-Index: 7

Research Timeline:

2018–2022: Ph.D. – Investigation of modified molybdenum oxide-based composites for photocatalytic applications.

2015–2017: M.Phil. – Photocatalytic conversion of CO2 into CH4 by Ag2O/Cu-TiO2 Nanocomposites.

2017–2019: Research Associate – In-situ fabrication of MoO3 hexagonal flowers decorated with Co3O4 microrods.

This concise summary showcases Dr. Muhammad Khalid Hussain’s academic journey, research expertise, and significant contributions in the field of Materials Science and Condensed Matter Physics.